User Manual

Standoffs and Mounting Holes
Depending on your project, you can mount a qwiic enabled board on the mounting
holes using standoffs. Below are two images showing Qwiic devices mounted on each
version of the Qwiic pHAT.
Qwiic Devices Mounted on v2.0 Qwiic Device Mounted on v1.0
Stackable Headers
When placing a Raspberry Pi and the pHat in an enclosure (like the Pi Tin), we noticed
that the pHAT was not fully inserted in Pi's header pins. You will need an additional
pair of stackable headers for a secure connection depending on your enclosure.
7/9