Data Sheet

8/29/2019 Makey Makey Classic Hookup Guide - learn.sparkfun.com
https://learn.sparkfun.com/tutorials/makey-makey-classic-hookup-guide 12/16
Once selected, the prompt will ask you to check and ensure that you have the correct Makey Makey version. On
the back side with the black female headers, you will notice that the board has a version number printed as v.1.2 If
you do not have that version, you will not be able to remap the keys with these instructions. If it is v.1.2, proceed
by connecting the Mini-USB cable to the Makey Makey and clicking on the START button. For now, do not connect
the other end to your computer's USB port.
Grab two alligator clips and connect the up (↑) and down (↓) arrows together. Then connect the left (←) and right
(→) arrows. Once connected, connect the other end of the USB cable to your computer's USB port. You will notice
the green LEDs begin to fade in and out, indicating that the Makey Makey is in programming mode.
The browser will eventually respond with a note indicating that the Makey Makey is detected. If you do not see the
message, you may need to unplug the USB cable from your computer and start again. Also, make sure that the
browser to remap keys is active. Otherwise, follow the prompt by removing the alligator clips if the Makey Makey is
in programming mode.