User Manual

Setup Configurations (Arduino is shown but MyoWare is compatible with most development boards)
a) Battery powered with isolation via no direct external connections
b) Battery powered sensor, Grid powered MCU with output isolation
Isolation
Amplifier
(ISO124)
Note: Isolation amplifier and
battery provide isolation
between user and electrical
grid. IC models are
suggestions only.
Note: Since no component is
connected to electrical grid,
further isolation is not
required. It is also
acceptable to power the
MCU with a battery via the
USB or barrel ports.
EMAIL: [e-mail]
www.AdvancerTechnologies.com
RECOMMENDED
© 2015
(Note: Arduino and batteries not included. Arduino setup is only an example; sensor will work with numerous other devices.)