Datasheet

ZED-F9T-Data sheet
Document information
Title ZED-F9T
Subtitle u-blox F9 high accuracy timing module
Document type Data sheet
Document number UBX-18053713
Revision and date R06 18-Nov-2020
Document status Early production information
Disclosure restriction C1-Public
Product status Corresponding content status
In development /
prototype
Objective specification Target values. Revised and supplementary data will be published later.
Engineering sample Advance information Data based on early testing. Revised and supplementary data will be
published later.
Initial production Early production information Data from product verification. Revised and supplementary data may be
published later.
Mass production /
End of life
Production information Document contains the final product specification.
This document applies to the following products:
Product name Type number Firmware version PCN reference
ZED-F9T ZED-F9T-00B-01 TIM 2.01
u-blox reserves all rights to this document and the information contained herein. Products, names, logos and designs
described herein may in whole or in part be subject to intellectual property rights. Reproduction, use, modification or
disclosure to third parties of this document or any part thereof without the express permission of u-blox is strictly prohibited.
The information contained herein is provided "as is" and u-blox assumes no liability for the use of the information. No warranty,
either express or implied, is given with respect to, including but not limited to, the accuracy, correctness, reliability and fitness
for a particular purpose of the information. This document may be revised by u-blox at any time. For most recent documents,
please visit www.u blox.com.
Copyright © 2020, u-blox AG.
u-blox is a registered trademark of u-blox Holding AG in the EU and other countries.
UBX-18053713 - R06

Page 2 of 23
C1-Public Early production information