Datasheet

NEO-M9N-Data sheet
Protocol Type
NMEA 4.10 Input/output, ASCII
RTCM 3.3 Input only, binary
Table 6: Supported protocols
For a specification of the protocols, see the u-blox NEO-M9N Interface description [2].
1.5 Firmware features
Feature Comment
Assisted GNSS AssistNow Online, AssistNow Offline and AssistNow Autonomous supported
Backup modes Hardware backup mode, software backup mode
Data batching Autonomous tracking up to 5 min
Data-logger Position, velocity, time, and odometer data
Geo-fencing Up to 4 circular areas
Power save modes On/off, cyclic
Odometer Measure traveled distance with support for different user profiles
Upgradeable firmware Firmware can be upgraded via host upload or updated in the internal flash memory.
Table 7: Firmware features
Feature Comment
Anti-jamming RF interference and jamming detection and reporting; Active GNSS in-band filtering
Anti-spoofing Spoofing detection and reporting
Configuration lockdown Receiver configuration can be locked by command
Message integrity All messages signed with SHA-256
Secure boot Only signed FW images executed
Table 8: Security features
UBX-19014285 - R02

1 Functional description Page 6 of 21
Advance information