Datasheet
Table Of Contents
- Document Information
- Contents
- 1 Functional description
- 1.1 Overview
- 1.2 Product features
- 1.3 Performance
- 1.4 Block diagram
- 1.5 Supported GNSS Constellations
- 1.6 Assisted GNSS (A-GNSS)
- 1.7 Augmentation Systems
- 1.8 Broadcast Navigation Data
- 1.9 Untethered Dead Reckoning (UDR)
- 1.10 Odometer
- 1.11 Data logging
- 1.12 Geofencing
- 1.13 Message Integrity Protection
- 1.14 Spoofing Detection
- 1.15 TIMEPULSE
- 1.16 Protocols and interfaces
- 1.17 Interfaces
- 1.18 Clock generation
- 1.19 Power management
- 1.20 Antenna
- 2 Pin Definition
- 3 Configuration management
- 4 Electrical specification
- 5 Mechanical specifications
- 6 Reliability tests and approvals
- 7 Product handling & soldering
- 8 Default messages
- 9 Labeling and ordering information
- Related documents
- Revision history
- Contact
NEO-M8U - Data Sheet
UBX-15015679 - R06 Related documents Page 26 of 27
Product Information
Related documents
[1] NEO-M8U Hardware Integration Manual, UBX-15016700
[2] u-blox 8 / u-blox M8 Receiver Description including Protocol Specification, UBX 13003221
[3] u-blox Package Information Guide, UBX-14001652
[4] MGA Services User Guide, UBX-13004360
☞ For regular updates to u-blox documentation and to receive product change notifications, register
on our homepage (www.u-blox.com).
Revision history
Revision Date Name Comments
R01 17-Feb-2016 amil Objective Specification
R02 01-Jun-2016 ghun/amil Advance Information
Updated Section 2 for Pin name changes, Section 4.1, Section 4.3, Section
4.4 SPI Timing, Figure 1, Figure 2, and Section 1.3.
R03 27-Jun-2016 njaf Early Product Information
R04 20-Sep-2016 njaf Production Information
R05 02-Oct-2018 pmcm, njaf Changed the firmware version (page 2). Updated Mechanical specifications
(section 5).
R06 15-Feb-2019 mawa Changed ordering code to -04B