Datasheet
Table Of Contents
- Document Information
- Contents
- 1 Functional description
- 1.1 Overview
- 1.2 Product features
- 1.3 Performance
- 1.4 Block diagram
- 1.5 Supported GNSS Constellations
- 1.6 Assisted GNSS (A-GNSS)
- 1.7 Augmentation Systems
- 1.8 Broadcast Navigation Data
- 1.9 Untethered Dead Reckoning (UDR)
- 1.10 Odometer
- 1.11 Data logging
- 1.12 Geofencing
- 1.13 Message Integrity Protection
- 1.14 Spoofing Detection
- 1.15 TIMEPULSE
- 1.16 Protocols and interfaces
- 1.17 Interfaces
- 1.18 Clock generation
- 1.19 Power management
- 1.20 Antenna
- 2 Pin Definition
- 3 Configuration management
- 4 Electrical specification
- 5 Mechanical specifications
- 6 Reliability tests and approvals
- 7 Product handling & soldering
- 8 Default messages
- 9 Labeling and ordering information
- Related documents
- Revision history
- Contact
NEO-M8U - Data Sheet
UBX-15015679 - R06 Product handling & soldering Page 22 of 27
Product Information
7 Product handling & soldering
7.1 Packaging
The NEO-M8U GNSS modules are delivered as hermetically sealed, reeled tapes in order to enable
efficient production, production lot set-up and tear-down. For more information see the
u-blox
Package Information Guide
Error! Reference source not found..
7.1.1 Reels
The NEO-M8U GNSS modules are deliverable in quantities of 250 pcs on a reel. The NEO-M8U
receivers are shipped on Reel Type B, as specified in the
u-blox Package Information Guide
Error!
Reference source not found.Error! Reference source not found..
7.1.2 Tapes
The dimensions and orientations of the tapes for NEO-M8U GNSS modules are specified in
Figure 5.
Figure 5: Dimensions and orientation for NEO-M8U modules on tape
7.2 Shipment, storage and handling
For important information regarding shipment, storage and handling see the
u-blox Package
Information Guide
Error! Reference source not found..