Datasheet
Table Of Contents
- Document Information
- Contents
- 1 Functional description
- 1.1 Overview
- 1.2 Product features
- 1.3 Performance
- 1.4 Block diagram
- 1.5 Supported GNSS Constellations
- 1.6 Assisted GNSS (A-GNSS)
- 1.7 Augmentation Systems
- 1.8 Broadcast Navigation Data
- 1.9 Untethered Dead Reckoning (UDR)
- 1.10 Odometer
- 1.11 Data logging
- 1.12 Geofencing
- 1.13 Message Integrity Protection
- 1.14 Spoofing Detection
- 1.15 TIMEPULSE
- 1.16 Protocols and interfaces
- 1.17 Interfaces
- 1.18 Clock generation
- 1.19 Power management
- 1.20 Antenna
- 2 Pin Definition
- 3 Configuration management
- 4 Electrical specification
- 5 Mechanical specifications
- 6 Reliability tests and approvals
- 7 Product handling & soldering
- 8 Default messages
- 9 Labeling and ordering information
- Related documents
- Revision history
- Contact
NEO-M8U - Data Sheet
UBX-15015679 - R06 Document Information Page 2 of 27
Product Information
Document Information
Title NEO-M8U
Subtitle u-blox M8 Untethered Dead Reckoning module including 3D inertial sensors
Document type Data Sheet
Document number UBX-15015679
Revision and date R06 15-Feb-2018
Document status Product Information
Product status
Corresponding content status
In Development /
Prototype
Objective Specification Target values. Revised and supplementary data will be published later.
Engineering Sample Advance Information Data based on early testing. Revised and supplementary data will be published later.
Initial Production Early Production Information Data from product verification. Revised and supplementary data may be published later.
Mass Production /
End of Life
Production Information Document contains the final product specification.
This document applies to the following products:
Product name Type number ROM/FLASH version
PCN reference
NEO-M8U NEO-M8U-04B-00 Flash FW 3.01 UDR 1.21 N/A
u-blox or third parties may hold intellectual property rights in the products, names, logos and designs included in this
document. Copying, reproduction, modification or disclosure to third parties of this document or any part thereof is only
permitted with the
express written permission of u-blox.
The information contained herein is provided “as is” and u
-blox assumes no liability for its use. No warranty, either express or
implied, is given, including but not limited
to, with respect to the accuracy, correctness, reliability and fitness for a particular
purpose of the information. This document may be revised by u
-blox at any time without notice. For the most recent
documents, visit www.u
-blox.com.
Copyright © u
-blox AG.