Data Sheet

ZOE-M8 - Data Sheet
UBX-16008094 - R07 Production Information Pin definition
Page 17 of 29
Pin
#
SiP Name I/O Description Remark
ZOE-M8Q V_DCDC_OUT O DCDC converter output Connect to VCC if DCDC not used
H9 All V_BCKP I Backup supply
J1 All VCC I Supply voltage Clean and stable supply needed
J2 All VCC I Supply voltage Clean and stable supply needed
J3 All GND Ground
J4 All RXD/SPI MOSI I Serial interface. See section 1.17.5. Leave open if not used.
J5 All TXD/SPI MISO O Serial interface. See section 1.17.5. Leave open if not used.
J6 All RESET_N I System reset. See section 1.20. Leave open if not used.
J7 All RTC_I I RTC Input
Connect to GND if no RTC Crystal
attached.
J8 All RTC_O O RTC Output Leave open if no RTC Crystal attached.
J9 All GND Ground
Table 7: ZOE-M8 pinout
For more information about the pinouts, see the ZOE-M8 Hardware Integration Manual [1].