Datasheet

VS1053b Datasheet
13 LATEST DOCUMENT VERSION CHANGES
13 Latest Document Version Changes
This chapter describes the latest and most important changes to this document.
Version 1.22, 2014-12-19
Added mention of RIFF 8-bit and 16-bit data signedness to Chapter 10.6, Feeding PCM
Data.
Updated telephone number in Chapter 14, Contact Information.
Version 1.21, 2014-08-13
Clarified how Ogg Vorbis set Replay Gain parameters in Chapter 10.11.5, Ogg Vorbis.
Explained that Bass Enhancer handles the bass part of the audio signal in mono in Chap-
ter 9.6.3, SCI_BASS.
Added GPIO_DDR[9:8] and GPIO_ODATA[8] explanation to Chapter 11.10, GPIO.
Moved value from tV(min) to tV(max) in Chapter 7.4.4, SPI Timing Diagram.
Chapter 10.8, PCM / ADPCM Recording, has been updated to better explain how to
record using the VS1053b Patches package.
Clarified byte endianness when reading PCM or ADPCM audio data in Chapter 10.8.3,
Adding a PCM RIFF Header, and Chapter 10.8.4, Adding an IMA ADPCM RIFF Header.
Version 1.20, 2012-12-03
Major update to Chapter 11, VS1053b Registers. Added Chapter 11.3, VS1053b Hard-
ware DAC Audio Paths, Chapter 11.4, VS1053b Hardware ADC Audio Paths, Chap-
ter 11.9, PLL Controller, Chapter 11.15, Analog-to-Digital Converter (ADC), Chapter 11.16,
Resampler SampleRate Converter (SRC), and Chapter 11.17, Sidestream Sigma-Delta
Modulator (SDM). Also revised several other sections.
Fixed SCI_MODE default value in Chapter 9.6.1, SCI_MODE (RW).
Added info on how to read DREQ through SCI to Chapter 7.2, Data Request Pin DREQ.
Slight reorganization to make datasheet more similar to VS1063a Datasheet.
Version 1.13, 2011-05-27
xRESET, XTALI and XTALO high-level are referenced from IOVDD in Chapter 4.5.
Version: 1.22, 2014-12-19 88