Datasheet

This board was designed to decrease the cost of Arduino development and increase ease of use (the
auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector.
One of the nice features of this board is a jumper on the back of the board that allows the board to be
configured to either 3.3V or 5V (both power output and IO level). This board ship as 5V, but you can cut
the default trace and add a solder jumper if you need to switch to 3.3V.
Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education
of e-textiles.