MCP9700 Specifications
Table Of Contents
- 1.0 Electrical Characteristics
- 2.0 Typical Performance Curves
- FIGURE 2-1: Accuracy vs. Ambient Temperature (MCP9700A/9701A).
- FIGURE 2-2: Accuracy vs. Ambient Temperature, with VDD.
- FIGURE 2-3: Supply Current vs. Temperature.
- FIGURE 2-4: Accuracy vs. Ambient Temperature (MCP9700/9701).
- FIGURE 2-5: Changes in Accuracy vs. Ambient Temperature (Due to Load).
- FIGURE 2-6: Load Regulation vs. Ambient Temperature.
- FIGURE 2-7: Output Voltage at 0˚C (MCP9700/9700A).
- FIGURE 2-8: Occurrences vs. Temperature Coefficient (MCP9700/9700A).
- FIGURE 2-9: Power Supply Rejection (D˚C/DVDD) vs. Ambient Temperature.
- FIGURE 2-10: Output Voltage at 0˚C (MCP9701/9701A).
- FIGURE 2-11: Occurrences vs. Temperature Coefficient (MCP9701/9701A).
- FIGURE 2-12: Power Supply Rejection (D˚C/DVDD) vs. Temperature.
- FIGURE 2-13: Output Voltage vs. Power Supply.
- FIGURE 2-14: Output vs. Settling Time to step VDD.
- FIGURE 2-15: Thermal Response (Air to Fluid Bath).
- FIGURE 2-16: Output Voltage vs. Ambient Temperature.
- FIGURE 2-17: Output vs. Settling Time to Ramp VDD.
- FIGURE 2-18: Output Impedance vs. Frequency.
- 3.0 Pin Descriptions
- 4.0 Applications Information
- 5.0 Packaging Information
© 2007 Microchip Technology Inc. DS21942D-page 15
MCP9700/9700A and MCP9701/9701A
APPENDIX A: REVISION HISTORY
Revision D (October 2007)
The following is the list of modifications:
1. Added the 3-lead SOT-23 devices to data sheet.
2. Replaced Figure 2-15.
3. Updated Package Outline Drawings.
Revision C (June 2006)
The following is the list of modifications:
1. Added the MCP9700A and MCP9701A devices
to data sheet.
2. Added TO92 package for the MCP9700/
MCP9701.
Revision B (October 2005)
The following is the list of modifications:
1. Added Section 3.0 “Pin Descriptions”.
2. Added the Linear Active Thermistor™ IC
trademark.
3. Removed the 2
nd
order temperature equation
and the temperature coeficient histogram.
4. Added a reference to AN1001 and correspond-
ing verbiage.
5. Added Figure 4-2 and corresponding verbiage.
Revision A (November 2005)
• Original Release of this Document.