Datasheet

Non-Isolated DC/DC Converter Specification
Model No.: WG8-36S1206
Shenzhen Wengao Electronic Co., Ltd reserves the copyright and right of final interpretation.
Overtemperature Protection
Wiring Instructions
A temperature sensor on the converter senses the average
temperature of the module. It protects the converter from
being damaged at high temperatures. When the
temperature exceeds the over temperature protection
threshold, the output will shut down. It will allow the
converter to turn on again when the temperature of the
sensed location falls by the value of Over temperature
Protection Hysteresis
The input and output of this product is terminals.
The user should ensure that the input and output wires
and terminals are connected reliably, and pay attention to
the wire diameter to meet the requirements of the power
supply current. If the cable to be used is long, it needs
Considering the voltage drop of the wire, if the voltage
drop is too large, the voltage output at the load end may
not meet the load demand. In this case, consider using a
thicker wire diameter or reducing the length of the wire.
Generally, if long wiring is required. Long line should be
used on the side where the current is relatively small. For
example, this product is a step-down product, so long
lines should be used on the input side.
Thermal Consideration
Sufficient airflow should be provided to help ensure reliable
operating of the WG8-36S1206
Therefore, thermal components are mounted on the top
surface of the WG8-36S1206 to dissipate heat to the
surrounding environment by conduction, convection and
radiation. Proper airflow can be verified by measuring the
temperature at the middle of the base plate.