Datasheet

Table Of Contents

Odseven Mini External USB Stereo Speaker for Raspberry Pi

DETAILS:

Voltage: 5V

Total power: 2 x 2W

SNR: 60dB

Impedance: 4 ohm

Cable Length: 1,168mm / 46"

Product Dimensions: 84.0mm x 43.0mm x 32.0mm / 3.3" x 1.7" x 1.3"

Description

Add some crisp and compact audio to your project with this Mini External USB

2.0 Speaker. It's USB-only and does not require or use a 3.5mm audio jack.

You'll get great audio, even with a device that doesn't have a head phone jack.

And since it is powered over USB, there's no need to charge it by other means,

merely plug it into your desired device's USB port and listen to the audio flow.

Compact and convenient to carry, it's simple and practical. With 2 built-in

speakers and no battery or adapter needed, this plug-and-play speaker is

perfect if you need a quick and portable audio solution.

PAGE 1
Odseven Mini External USB Stereo Speaker for Raspberry Pi DETAILS: Voltage: 5V Total power: 2 x 2W SNR: 60dB Impedance: 4 ohm Cable Length: 1,168mm / 46" Product Dimensions: 84.0mm x 43.0mm x 32.0mm / 3.3" x 1.7" x 1.3" Description Add some crisp and compact audio to your project with this Mini External USB 2.0 Speaker. It's USB-only and does not require or use a 3.5mm audio jack. You'll get great audio, even with a device that doesn't have a head phone jack.
PAGE 2
Works great with a Raspberry Pi, or any other computer. For use with the Pi, check out our guide which will show you how to set it up so it is the default output and then test it. Goes great with our USB microphone, if you want your own recording and playback setup.