Datasheet

DG600F Coin Acceptor Technical Manual Version 1.0 - 06.2010
Page 19 of 21-
8.5 Faulty Alarm Option
8.5 Faulty Alarm Option 8.5 Faulty Alarm Option
8.5 Faulty Alarm Option A3
A3A3
A3
When it displays A3, press button B to display existing parameters stored in machine.
00 (Alarm doesn't ring) 01 (Alarm rings one time)
02 (Alarm keeps ringing)
Press button B to adjust the needed parameter, press button A to next group of coin acceptor
parametersA4.
8.6
8.68.6
8.6 Serial Port RS232 Signal Output Format
Serial Port RS232 Signal Output Format Serial Port RS232 Signal Output Format
Serial Port RS232 Signal Output Format A4
A4A4
A4 (can alter the format if needed)
(can alter the format if needed) (can alter the format if needed)
(can alter the format if needed)
When it displays A4, press button B to display existing parameters stored in machine.
01 (1 byte) 02 (2 bytes) 03 (3 bytes)
01 (1 byte)：Transmit coin parameters via one byte.
E.g.: Coin parameters date is 01，then date transmitted is 0x01.
02 (2 bytes)：Transmit a title of 0xAA, and then follow with coin parameters data in one byte.
E.g.: coin parameters date is 01，then data transmitted is 0xAA + 0x01.
NOTE：
：：
：Interval between two bytes transmitted is 1ms.
03 (3 bytes)：Transmit a title of 0xAA, and then follow with coin parameters data in one byte,
at last a verification value (XOR value for two former bytes)
E.g.: coin parameters date is 01，then data transmitted is 0xAA + 0x01+ 0xAB.
NOTE：
：：
：Interval between two bytes transmitted is 1ms
Press button B to select coin acceptor parameters as needed, and press button A to next group
of Coin Acceptor parameters A5.
8.7
8.78.7
8.7 Serial Or Paralle
Serial Or ParalleSerial Or Paralle
Serial Or Parallel Port Option
l Port Optionl Port Option
l Port Option A5
A5A5
A5
When it displays A5, press button B to show existing parameters setting stored in machine
01 (serial port) 02 (parallel port)
01：On acceptance of enough coins, Serial port (5Pin) sends out signal but parallel port
doesn’t send.
02：On acceptance of enough coins, Parallel port (10Pin) sends out pulse signal but serial
port doesn’t send
Press button B to select coin acceptor parameters as needed, and press button A to back to
AP .
8.8 Exit
8.8 Exit 8.8 Exit
8.8 Exit The S
The SThe S
The Setting
ettingetting
etting
After finished Coin Acceptor parameters setting, keep pressing button A for 2 seconds, release
after 88 is displayed.