Datasheet

DG600F Coin Acceptor Technical Manual Version 1.0 - 06.2010
Page 16 of 21-
7. Coin Parameters Setting
7.1
7.17.1
7.1 Access
AccessAccess
Access To
ToTo
To Coin
CoinCoin
Coin Parameters
ParametersParameters
Parameters Setting
SettingSetting
Setting
Keep pressing button A till CP is displayed.
LED displays CP , press button A to select one of six groups of coins.
CP C1 C2 C3 C4 C5 C6
7.2
7.27.2
7.2 Clean Up All Coin Parameters
Clean Up All Coin ParametersClean Up All Coin Parameters
Clean Up All Coin Parameters
When it displays CP , keep pressing button B till CC is displayed, it will clean up all six
groups of coin parameters .
7.3
7.37.3
7.3 Clean Up Group Coin Parameters
Clean Up Group Coin ParametersClean Up Group Coin Parameters
Clean Up Group Coin Parameters
When it displays CP , press button A to select one group of coins parameters needed among
the six(C1~C6),
and then press button B to display coin values currently stored.
Keep pressing B key till 00 is displayed, then release, it means this group of coins parameters
are cleaned up.
7.4
7.47.4
7.4 Reset All Coin Parameters
Reset All Coin ParametersReset All Coin Parameters
Reset All Coin Parameters
7.4.1 Clean up all existing coin parameters firstly
When it displays CP, keep pressing button B till CC is displayed, then release, it will clean
up all six groups of coins parameters.
7.4.2 Set the first group of coins
Press button A to display C1, press button B to display the current coin value as 00,
press button B to adjust from 01 to A0 (A0=100).
01 02 …… 98 99 A0
Press button B to select the right coin value, and then deposit coins with same denomination
but different year issued (it prompts "bi" each time deposit a coin),max 20 pieces coin for
each group is available.
When there are 20 coins fully stored, it will prompt “bi.bi.bi”, and display F.
Press button A to next group setting, and display C2
7.4.3 Set the next group of coins
Please refer to steps 7.4.2 to set coins parameters of another 5 groups in C2~C6
7.5
7.57.5
7.5 Add
AddAdd
Add New Coin Parameters
New Coin ParametersNew Coin Parameters
New Coin Parameters
When it displays CP , press button A to select the needed coin group （C1~C6）, then press
button B to displays the current coin value stored , deposit coins needed (it prompts "bi" each
time deposit a coin), when it prompts “bi.bi.bi”and displays F ,it means this group is fully
stored and don't need to add coins anymore.