Datasheet

DG600F Coin Acceptor Technical Manual Version 1.0 - 06.2010
Page 10 of 21-
5. Parallel Output Mode
5.1 Ports Instruction
5.1 Ports Instruction5.1 Ports Instruction
5.1 Ports Instruction
Parallel connector
Industrial standard connector：10Pin DIL
◎Parallel ports
PIN FUNCTION ACTIVE
1 0 V
2 +12V
3
Accept C5 Low
4
Accept C6 Low
5 None
6
Inhibiting port（refer to item 5.2）
7
Accept C1 Low
8
Accept C2 Low
9
Accept C3 Low
10
Accept C4 Low
5.2
5.25.2
5.2 Forbid Accepting coins
Forbid Accepting coinsForbid Accepting coins
Forbid Accepting coins
◎Inhibiting port connection
5.2.1
5.2.15.2.1
5.2.1 Forbidden Mode 1
Forbidden Mode 1Forbidden Mode 1
Forbidden Mode 1 —
——
— Low Level forbid accepting coins
Low Level forbid accepting coinsLow Level forbid accepting coins
Low Level forbid accepting coins
When SW4 is on “OFF” position,
If the 6
th
Inhibiting port is disconnected or connected to a high level（>+3V）, coin acceptor
will accept all coins.
If the 6
th
Inhibiting port is connected to a low level（<+1V）, coin acceptor will refuse all
coins.