Data Sheet

870
Atmel | SMART SAM D21 [DATASHEET]
Atmel-42181G–SAM-D21_Datasheet–09/2015
z Bits 7:5 – Reserved
These bits are unused and reserved for future use. For compatibility with future devices, always write these bits to
zero when this register is written. These bits will always return zero when read.
z Bits 4:0 – MUXPOS[4:0]: Positive Mux Input Selection
These bits define the Mux selection for the positive ADC input. Table 32-14 shows the possible input selections. If
the internal bandgap voltage or temperature sensor input channel is selected, then the Sampling Time Length bit
group in the SamplingControl register must be written.
Table 32-14. Positive Mux Input Selection
MUXPOS[4:0] Group configuration Description
0x00 PIN0 ADC AIN0 pin
0x01 PIN1 ADC AIN1 pin
0x02 PIN2 ADC AIN2 pin
0x03 PIN3 ADC AIN3 pin
0x04 PIN4 ADC AIN4 pin
0x05 PIN5 ADC AIN5 pin
0x06 PIN6 ADC AIN6 pin
0x07 PIN7 ADC AIN7 pin
0x08 PIN8 ADC AIN8 pin
0x09 PIN9 ADC AIN9 pin
0x0A PIN10 ADC AIN10 pin
0x0B PIN11 ADC AIN11 pin
0x0C PIN12 ADC AIN12 pin
0x0D PIN13 ADC AIN13 pin
0x0E PIN14 ADC AIN14 pin
0x0F PIN15 ADC AIN15 pin
0x10 PIN16 ADC AIN16 pin
0x11 PIN17 ADC AIN17 pin
0x12 PIN18 ADC AIN18 pin
0x13 PIN19 ADC AIN19 pin
0x14-0x17 Reserved
0x18 TEMP Temperature reference
0x19 BANDGAP Bandgap voltage
0x1A SCALEDCOREVCC 1/4 scaled core supply
0x1B SCALEDIOVCC 1/4 scaled I/O supply
0x1C DAC DAC output
0x1D-0x1F Reserved