Data Sheet

261
Atmel | SMART SAM D21 [DATASHEET]
Atmel-42181G–SAM-D21_Datasheet–09/2015
18.8.18 Debug Control
Name: DBGCTRL
Offset: 0x0B
Reset: 0x00
Property: -
z Bits 7:1 – Reserved
These bits are unused and reserved for future use. For compatibility with future devices, always write these bits to
zero when this register is written. These bits will always return zero when read.
z Bit 0 – DBGRUN: Run During Debug
This bit is not reset by a software reset.
Writing a zero to this bit causes the RTC to halt during debug mode.
Writing a one to this bit allows the RTC to continue normal operation during debug mode.
Bit 76543210
DBGRUN
AccessRRRRRRRR/W
Reset00000000