Data Sheet

143
Atmel | SMART SAM D21 [DATASHEET]
Atmel-42181G–SAM-D21_Datasheet–09/2015
z Bit 3 – SERCOM1: SERCOM1 APB Clock Enable
0: The APBC clock for the SERCOM1 is stopped.
1: The APBC clock for the SERCOM1 is enabled.
z Bit 2 – SERCOM0: SERCOM0 APB Clock Enable
0: The APBC clock for the SERCOM0 is stopped.
1: The APBC clock for the SERCOM0 is enabled.
z Bit 1 – EVSYS: EVSYS APB Clock Enable
0: The APBC clock for the EVSYS is stopped.
1: The APBC clock for the EVSYS is enabled.
z Bit 0 – PAC2: PAC2 APB Clock Enable
0: The APBC clock for the PAC2 is stopped.
1: The APBC clock for the PAC2 is enabled.