Data Sheet

1101
Atmel | SMART SAM D21 [DATASHEET]
Atmel-42181G–SAM-D21_Datasheet–09/2015
Notes: 1. All timing characteristics given for 15pF capacitive load.
2. These valeus are based on simulations and not covered by test limits in production.
3. See “I/O Pin Characteristics” on page 950.
t
S_SDIS
Data input setup
time
Slave mode 4.8 3.9 ns
t
S_SDIH
Data input hold
time
Slave mode 1.2 1.2 ns
t
M_SDOV
Data output valid
time
Master transmitter 5.9 4.8 ns
t
M_SDOH
Data output hold
time
Master transmitter -0.5 -0.5 ns
t
S_SDOV
Data output valid
time
Slave transmitter 37.8 25.9 ns
t
S_SDOH
Data output hold
time
Slave transmitter 37.6 25.7 ns
t
PDM2LS
Data input setup
time
Master mode PDM2 Left 36.2 24.5 ns
t
PDM2LH
Data input hold
time
Master mode PDM2 Left -8.2 -8.2 ns
t
PDM2RS
Data input setup
time
Master mode PDM2 Right 31.9 20.9 ns
t
PDM2RH
Data input hold
time
Master mode PDM2 Right -6.7 -6.7 ns
Table A-51. I2S Timing Characteristics and Requirements (Device Variant A)
Symbol Description Mode
V
DD
=1.8V V
DD
=3.3V
UnitsMin. Typ. Max. Min. Typ. Max