Data Sheet

LIS3DH Registers description
Doc ID 17530 Rev 1 37/42
8.26 CLICK_SRC (39h)
Table 56. CLICK_CFG description
ZD Enable interrupt double CLICK-CLICK on Z axis. Default value: 0
(0: disable interrupt request; 1: enable interrupt request on measured accel. value
higher than preset threshold)
ZS Enable interrupt single CLICK-CLICK on Z axis. Default value: 0
(0: disable interrupt request; 1: enable interrupt request on measured accel. value
higher than preset threshold)
YD Enable interrupt double CLICK-CLICK on Y axis. Default value: 0
(0: disable interrupt request; 1: enable interrupt request on measured accel. value
higher than preset threshold)
YS Enable interrupt single CLICK-CLICK on Y axis. Default value: 0
(0: disable interrupt request; 1: enable interrupt request on measured accel. value
higher than preset threshold)
XD Enable interrupt double CLICK-CLICK on X axis. Default value: 0
(0: disable interrupt request; 1: enable interrupt request on measured accel. value
higher than preset threshold)
XS Enable interrupt single CLICK-CLICK on X axis. Default value: 0
(0: disable interrupt request; 1: enable interrupt request on measured accel. value
higher than preset threshold)
Table 57. CLICK_SRC register
IA DCLICK SCLICK Sign Z Y X
Table 58. CLICK_SRC description
--
IA Interrupt active. Default value: 0
(0: no interrupt has been generated; 1: one or more interrupts have been generated)
DCLICK Double CLICK-CLICK enable. Default value: 0 (0:double CLICK-CLICK detection dis-
able, 1: double CLICK-CLICK detection enable)
SCLICK Single CLICK-CLICK enable. Default value: 0 (0:Single CLICK-CLICK detection dis-
able, 1: single CLICK-CLICK detection enable)
Sign CLICK-CLICK Sign. 0: positive detection, 1: negative detection
Z Z CLICK-CLICK detection. Default value: 0
(0: no interrupt, 1: Z High event has occurred)
Y Y CLICK-CLICK detection. Default value: 0
(0: no interrupt, 1: Y High event has occurred)
X X CLICK-CLICK detection. Default value: 0
(0: no interrupt, 1: X High event has occurred)