Data Sheet

ManualsBrandsSparkfun Electronics ManualsAccelerometers±16g Triple Axis Accelerometer Breakout Board - LIS3DH

LIS3DH Registers description

Doc ID 17530 Rev 1 29/42

8.5 INT_COUNTER (0Eh)

8.6 WHO_AM_I (0Fh)

Device identification register.

8.7 TEMP_CFG_REG (1Fh)

8.8 CTRL_REG1 (20h)

Table 20. INT_COUNTER register

IC7IC6IC5IC4IC3IC2IC1IC0

Table 21. WHO_AM_I register

00110011

Table 22. TEMP_CFG_REG register

ADC_PDTEMP_EN000000

Table 23. TEMP_CFG_REG description

ADC_PD

ADC enable. Default value: 0

(0: ADC disabled; 1: ADC enabled)

TEMP_EN

Temperature sensor (T) enable. Default value: 0

(0: T disabled; 1: T enabled)

Table 24. CTRL_REG1 register

ODR3 ODR2 ODR1 ODR0 LPen Zen Yen Xen

Table 25. CTRL_REG1 description

ODR3-0

Data rate selection. Default value: 00

(0000:50 Hz; Others: Refer to Table 2 5, “Data rate configuration”)

LPen

Low power mode enable. Default value: 0

(0: normal mode, 1: low power mode)

Zen

Z axis enable. Default value: 1

(0: Z axis disabled; 1: Z axis enabled)

Ye n

Y axis enable. Default value: 1

(0: Y axis disabled; 1: Y axis enabled)

Xen

X axis enable. Default value: 1

(0: X axis disabled; 1: X axis enabled)