Data Sheet

LIS3DH Register mapping
Doc ID 17530 Rev 1 27/42
Registers marked as Reserved must not be changed. The writing to those registers may
cause permanent damages to the device.
The content of the registers that are loaded at boot should not be changed. They contain the
factory calibration values. Their content is automatically restored when the device is
powered-up.
INT1_SOURCE r 31 011 0001 00000000
INT1_THS rw 32 011 0010 00000000
INT1_DURATION rw 33 011 0011 00000000
Reserved rw 34-37 00000000
CLICK_CFG rw 38 011 1000 00000000
CLICK_SRC r 39 011 1001 00000000
CLICK_THS rw 3A 011 1010 00000000
TIME_LIMIT rw 3B 011 1011 00000000
TIME_LATENCY rw 3C 011 1100 00000000
TIME_WINDOW rw 3D 011 1101 00000000
Table 17. Register address map
Name Type
Register address
Default Comment
Hex Binary