Data Sheet

Mechanical and electrical specifications LIS3DH
14/42 Doc ID 17530 Rev 1
2.5 Absolute maximum ratings
Stresses above those listed as “absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Note: Supply voltage on any pin should never exceed 4.8 V
Table 8. Absolute maximum ratings
Symbol Ratings Maximum value Unit
Vdd Supply voltage -0.3 to 4.8 V
Vdd_IO I/O pins Supply voltage -0.3 to 4.8 V
Vin
Input voltage on any control pin
(CS, SCL/SPC, SDA/SDI/SDO, SDO/SA0)
-0.3 to Vdd_IO +0.3 V
A
POW
Acceleration (any axis, powered, Vdd = 2.5 V)
3000 for 0.5 ms g
10000 for 0.1 ms g
A
UNP
Acceleration (any axis, unpowered)
3000 for 0.5 ms g
10000 for 0.1 ms g
T
OP
Operating temperature range -40 to +85 °C
T
STG
Storage temperature range -40 to +125 °C
ESD Electrostatic discharge protection 2 (HBM) kV
This is a mechanical shock sensitive device, improper handling can cause permanent
damages to the part.
This is an ESD sensitive device, improper handling can cause permanent damages to
the part.