User's Manual

Technical Document Template Version 1.0 Page 60 of 62
b. Backup/ Restore
1
Restore defaults
When restoring default values, users may choose to hold
current values for network, date, time and lens set up.
2
Backup config
Click to save the camera’s current configuration on your
computer. This feature can significantly save configuration
time by allowing users to load the current configuration on
another camera of the same model and firmware version.
Make sure to change the IP address configuration to avoid
IP conflict.
3
Restore config
Click to load the backup configuration file. The camera will
reboot to finalize the process and the new settings will
become effective. Users may also choose to hold current
values for network, date, time and lens set up.