User's Manual
Technical Document Template Version 1.0 Page 40 of 62
a. Event:
1
Name
Insert Motion detection event name, only allow
characters 0-9, a-z, A-Z, “.”, “_”
2
Enabled
On
Users can enabled/ disabled this function.
Off
3
Triggered by
Motion Detection
Select the motion detection as the trigger event type.
b. Settings:
1
Min time between triggers
Value 1~999 sec
Minimum interval for an event to trigger the next
action.
2
Detection Area
Select the motion detection area for the trigger action.
If no motion detection area was added on the analytics
page, detection area will appear as none.
3
Detection Type
Start
Select when to initiate the trigger event.
Stop
4
Please Configure Motion
Detection
Click on Motion Detection to go to motion detection
configuration page.
c. Action:
1
Send Media
Server Type
Instructs the camera to send out media. You will need
to specify whether you want to use USB, network
storage or SD card. Make sure that the servers are set
up before using it.
Attached Type
2
Send Notification
HTTP
This action type uses the HTTP and HTTPS recording
server. You can use this to have the camera trigger a
script on a server.
HTTPS
3
Activate Digital Output
Digital Output1
Allows you to perform an action with the camera’s
digital output. You may also specify the duration you
want the camera to trigger the event.
d. Schedules:
1
Always
Select the schedule for the above Event settings to be
active. You may choose one of the available or
schedule, or configure another schedule on the
schedule menu.
2
Schedule
3
Please Configure Schedule
Click on Schedule to go to schedule configuration page.
How to create Motion recording:
a. Step 1: Key in event name and enable motion detection
b. Step 2: Configure motion detection settings. Remember to first add motion detection area
on the analytics page or click the link provided “motion detection.”
c. Step 3: Select the action type after event triggered. Action options includes send media to
event server, send notification to HTTP/HTTPS server and activation of digital
output.
d. Step 4: Select motion detection recording schedule
e. Step 5: Click the save button