User's Manual

Technical Document Template Version 1.0 Page 25 of 62
2. PPPoE page: allows users to configure PPPoE.
Image 15. PPPoE page
a. PPPoE:
1
Enabled
On
Users can enabled/ disabled this function.
Off
Authentication
PAP
Select the authentication type.
CHAP
IP Address
Displays the current IP address obtained from the
Internet Service Provider (ISP). It will display 0.0.0.0
if the camera is not connected to the Internet via
PPPoE.
IPv6 Address
User ID
Enter the user ID for your DSL service. The user ID is
provided by your ISP. Enter the password for the DSL
account. Re-type the password in the field below.
Password
Re-type Password
Obtain DNS server address
automatically
Typically your ISP will send DNS Server information
to the camera when it connects. However, please select
“Use the following DNS server address” if your ISP
requires entering specific DNS servers manually.
Use the following DNS
server address
How to setup PPPoE:
a. Step 1: Enable the PPPoE function
b. Step 2: Choose authentication format
c. Step 3: Type in User ID and password
d. Step 4: Choose DNS server address
e. Step 5: Click the save button