User Manual

HOW TO REPAIR
When the fuselage is damaged, please use
thin tape, such as Scotch tape, for your
repairs as shown in the figure.
TAPE
Make cuts to the upper and lower lines of the rudder at
the vertical tail of the airplane using scissors as shown.
Please be careful to avoid injury when using scissors.
When you bend the rudder to the right as shown in the
figure, the airplane will make a right circular flight.
When you bend the rudder to the left, the airplane will
make a left circular flight.
Adjust the rudder within the range of approximately
2mm. If you bend the rudder more than 2mm, the
airplane may not fly.
HOW TO ADJUST YOUR FLIGHT
MAKE CUTS
The shape of the rudder varies for each model.
RIGHT
CIRCULAR FLIGHT
LEFT
CIRCULAR FLIGHT