Manualshelf

User Manual

ManualsBrandsSpanco ManualsCranes & HoistsAdjustable Height Aluminum Gantry Crane, 8'W x 6'-11"-9'-5"H, 1000 Lb. Capacity
12345678910
3
Warnings.................................................................................................................... 3
Installation................................................................................................................. 4
Maintenance...............................................................................................................5
Span Adjustment.........................................................................................................5
V-Groove Installation Instructions...............................................................................6-7
Bill of Materials.......................................................................................................... 8
Optional Accessories....................................................................................................9
Lift Kit Instructions................................................................................................... 10
Warranty................................................................................................................... 12
Service Policy............................................................................................................12
TABLE OF CONTENTS
• Do not lift or support humans.
• When moving gantry, keep load as close to the floor as possible and
position the load in the center of the I-beam.
• Ensure the load is not attached to the floor and remove any obstacles that
impede lifting.
• Adjustments and/or repairs should be made in an area where it will have
the least interference with operation.
• Secure trolley and hoist in the center of I-beam when adjusting height.
• Ensure the rated capacity is clearly labeled on each side of the I-beam.
• Do not adjust the height when gantry is under load.
• Do not lift more than the rated capacity.
• Do not push or pull gantry with a forklift or other vehicle.
• Do not allow the load to swing or roll against support members.
• Push the gantry, not the load.
• Inspect gantry for missing or broken parts before operating.