Install Manual

6SPAN Drive Installation Manual Preparing to install |
Preparing to install
1. SPAN Drive package contents
Inspect the packaging and SPAN Drive for damage.
Ensure you have received the following components:
WARNING: If the unit is damaged in any way, do not proceed with the installation.
Contact SPAN for further instructions.
WARNING: SPAN Drive must be installed by a licensed electrician. Before installing your charger, be
sure to obtain any required permits and/or approvals in accordance with applicable codes, regulations,
and ordinances for electrical installations.
3X #12 Phillips screw
& anchors
1X Buttonhead screw
& 1X Flathead
(extra for charger assembly)
Included mounting parts:
SPAN Drive
(with charging cable attached)
Getting Started Card Installation template
Optional gasket
(for rear entry installation)