Install Manual
Table Of Contents
- CONTENTS
- ABOUT YOUR span panel
- Preparing to Install
- Installation
- Troubleshooting & SERVICING
- APPENDIX A: circuit breaker Compatibility
- The Span Panel is compatible with the following Homeline circuit breakers from Square D:
- The Span Panel is compatible with the following circuit breakers from Eaton:
- The Span Panel is compatible with the following circuit breakers from Siemens:
- The Span Panel is compatible with the following MP circuit breakers from Murray:
- APPENDIX B: Surge protective device compatability
Span 1-00800-xx Installation Manual (rev. 2022-01-28) 3
CONTENTS
ABOUT YOUR SPAN PANEL
PREPARING TO INSTALL
1. Unpacking and Inspecting the Panel
2. Installation Requirements
3. Planning the Install Location
INSTALLATION
1. Mounting the Panel
2. Using the Panel as Service Equipment
3. Selecting Breakers
4. Wiring the Panel
5. Communication Wiring
6. Configuring the Door Swing Direction
7. Installing the Flush Mount Trim Kit
8. Final Inspection and Closing the Unit
9. Commissioning
TROUBLESHOOTING & SERVICING
APPENDIX A: CIRCUIT BREAKER COMPATIBILITY