Install Manual

Span 1-00800-xx Installation Manual (rev. 2022-01-28) 22
• Branch-feeder arc fault circuit interrupter circuit breakers type QAF2; 1-pole and 2-pole; rated 15-20 amperes; catalog numbers
QA followed by 115 to 120; followed by AF; may be followed by H.
• Combination arc fault circuit interrupter circuit breakers type QAF and QAF2; 1-pole and 2-pole; rated 10-20 amperes; catalog
numbers Q or QA followed by 110 to 220; followed by AFC; may be followed by H.
• Tandem combination arc-fault circuit interrupter circuit breakers type CAFCI; 1-pole; rated 10-20 amperes; catalog numbers Q
followed by 1010 to 2020; followed by AFC.
• Ground fault circuit interrupter circuit breakers type QPF and QPF2; 1-pole and 2-pole; rated 10-60 amperes; catalog numbers
QF followed by 110 to 260; followed by A; may be followed by H.
• Ground fault equipment protection circuit breakers type QE; 1-pole and 2-pole; rated 15-60 amperes; catalog numbers QE
followed by 115 to 260; may be followed by H.
• Dual function combination ground fault and arc-fault protection circuit breakers type QFGA2; 1-pole; rated 10-20 amperes;
catalog numbers Q followed by 110 to 120; followed by DF; may be followed by H.
The Span Panel is compatible with the following MP circuit breakers from Murray:
• General circuit breakers type MP-T; 1-pole and 2-pole; rated 10-90 amperes; catalog numbers MP or MPH followed by 110 to
290; may be followed by KH.
• Duplex (tandem) circuit breakers type MH-T; 1-pole; rated 10-30 amperes; catalog numbers MP followed by 1010 to 3030; may
be followed by N.
• Triplex (tandem) circuit breakers type MH-T; 1-pole and 2-pole; rated 10-30 amperes; catalog numbers MP followed by 21010 to
25020.
• Quadplex (tandem) circuit breakers type MH-T; 2-pole; rated 15-40 amperes; catalog numbers MP followed by 21515 to 24040;
followed by CT2.
• Branch-feeder arc fault circuit interrupter circuit breakers type MP-AT2; 1-pole and 2-pole; rated 15-20 amperes; catalog
numbers MPA followed by 115 to 120; followed by AF; may be followed by H.
• Combination arc fault circuit interrupter circuit breakers type MP-AT2; 1-pole and 2-pole; rated 10-20 amperes; catalog
numbers MP or MPA followed by 110 to 220; followed by AFC; may be followed by H.
• Ground fault circuit interrupter circuit breakers type MP-GT; 1-pole and 2-pole; rated 10-60 amperes; catalog numbers MP
followed by 110 to 260; followed by GFA; may followed by H.
• Ground fault equipment protection circuit breakers type MP-ET; 1-pole and 2-pole; rated 15-60 amperes; catalog numbers MP
followed by 115 to 260; followed by EG; may be followed by H.
• Dual function combination ground fault and arc-fault protection circuit breakers type MP-GAT2; 1-pole; rated 10-20 amperes;
catalog numbers MP followed by 110 to 120; followed by DF; may be followed by H.