User Manual
40
Apply Height Adjustment and Moving Label (46) to front of pole, where it is clearly visible.
Apposez l'étiquette de réglage de la hauteur et de déplacement (46) sur l'avant du poteau, à un endroit bien visible.
Den Höheneinstell- und Transportaufkleber (46) gut sichtbar an der Vorderseite der Stange anbringen.
Aplique la etiqueta de ajuste de la altura y movimiento (46) en la parte frontal del poste, en donde quede claramente
visible.
#$)
'"'&*
#,(
#$)
Peel protective film from surface of
acrylic backboard prior to use.
Décollez le film de protection de la
surface du panneau en acrylique
avant usage.
Vor Gebrauch die Schutzfolie von
der Oberfläche der Akryl-Korbwand
abziehen.
Desprenda la película protectora de
la superficie del respaldo de acrílico
antes de usarlo.
Install net (43) / Installez le filet (43). / Das Netz (43) anbringen. / Instale la red (43).
2
2
1
3
TO ADJUST BACKBOARD:
1. While holding handle, remove pin.
2. Move elevator up or down to
desired height.
3. Replace pin full length to lock
system at desired height.
511679 05/05
1
2
4
3
MOVING SYSTEM
Adjust basketball backboard
height to lowest position.
While holding pole, rotate
basketball system forward
until wheels engage with
ground.
Move basketball system to
desired location.
Carefully rotate basketball
system upright.
1.
2.
3.
4.
5.
C h e c k s y s t e m f o r s t a b i l i t y.
HEIGHT ADJUSTMENT
46
$*)(+,+*-)L'*'*((##()+()-)'#
34
43
34
43