User Guide

STEP A…Filling Your Spa
You will need:
Spa Choice
®
Metal Free
Now it’s time to fill your spa. If you are using a garden hose, let the
water run for a few minutes before placing the hose into the spa. This
will ensure that the microorganisms that build up in the hose during
inactivity will not contaminate your spa. Fill the spa according to the
directions recommended by your spa owner’s manual.
Once the spa is full, a sequestering agent should be added to the spa
water to prevent metal staining and corrosion to your spa’s finish.
Use Spa Choice
®
Metal Free now, and every time you fill your spa.
1. Add one bottle (1 pint) of Spa Choice
®
Metal Free
around the spa waterline.
2. Circulate the water for 30 minutes.
Go onto “Step B…Balancing Your Spa Water”
-6-
Spa_guide_2008:single pages 11/25/08 3:26 PM Page 7