Operation Manual

Page 8
4. Open the quick-release at top end of T-tube.
5. Insert and secure left and right handlebars by pressing the spring-
loaded buttons and inserting them into T-tube. Make certain BOTH
handlebars are properly locked into the T-bar by spring-loaded
buttons.
6. Close quick-release to lock handlebar firmly.
7. To adjust the height of the handlebars: open the quick-release
lever.
8. Press the spring-load button and slide T-bar to desired position,
and make sure spring-load button is lock into the hole of tube.
9. Resecure the quick release lever to lock into place.
WARNING: Failure to properly secure the quick-release lever may
cause the T-tube to telescope up or down while riding which may
cause you to lose control and fall!