Operation Manual

Page 7
Setup and unfolding
Tightening brake handle.
Note: The screw of the brake handle was not tightened before the
product was packed in the factory; the user should tighten the
brake handle screw before using the scooter. Adjust brake handle
to suitable position and lock it by inner hexagon spanner.
Unfolding
1. Releassing folder by opening the quick release on right side of
folder.
2. Push "Folding" unlock button (A) to unlock head tube and raise
steering tube up until it securely locked in the correct position.
Sway the steering tube slightly to conform spring-load lock pin is
lock into the correct position.
3. Tightening quick-release at the right side of folder to lock the
folder.