Operation Manual

Page 15
Adjust brake cable
Check brake before riding as the following steps:
Grasp brake handle and push scooter forward. The rear wheel will not
be turned, and scooter will not be moved forward. Opening brake
handle, the scooter can be push and move forward easily. If brake is
out of work, please adjust or maintain brake before riding.
Tiny adjustment: adjust the screw of brake handle to loose or tighten
brake cable.
Wide adjustment:
1. Loosing brake cable nut.
2. Drawing brake cable to a suitable place by sharp-nose pliers.
3. Tightening the cable nut.
WARNING: Failure of brake may cause the speed of scooter out of
control, it may cause risk of injury or death.