Operation Manual

Page 7
7. Take the handle bars from the handle bar seat. Insert the left and the
right handle bars into the T-tube while pressing the spring-loaded
buttons. Make certain BOTH handle bars are properly locked into the T-
bar by spring-loaded buttons.
8. To adjust the height of the handle bars: open the quick-release lever.
9. Press the spring-loaded button, slide T-bar to desired position, and make
sure the spring-loaded button is locked into one of the three holes of the
tube.
10. Re-secure the quick-release lever to lock steering tube into place.
WARNING: Failure to properly secure the quick-release lever may cause
the T-tube to telescope up or down while riding which may cause you to
lose control and fall! Check all locks thoroughly and on a regular basis.