Instruction Manual

schneider-electric.com | 3
SpaceLogic Sensors, SXWS Blank Covers Installation Instructions
USA: [phone]
Europe: [phone]
Asia: [phone]
www.schneider-electric.com
© 2020 Schneider Electric. All rights reserved. All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies. November 2020
Schneider Electric · 800 Federal Street, Andover, MA 01810 USA Z207550-0F nk
SXWS Base Installation
1. With sensor base fully installed, align top of cover to
mounting tabes on top of sensor base. Swing cover down-
ward until it latches at the bottom.
2. Install locking screw to secure cover in closed position.
Dimensions mm (in.)
Optimum Housing
Medium Housing
115
(4.5)
85
(3.3)
23.7
(0.9)
115
(4.5)
85
(3.3)
24
(0.9)
Precautions
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classied
locations.
• Read and understand the instructions before installing the
product.
• Turn o󰀨 all power supplying equipment before working on
it.
• The installer is responsible for conformance to all
applicable codes.
If this product is used in a manner not specied by the
manufacturer, the protection provided by the product may be
impaired. No responsibility is assumed by the manufacturer for
any consequences arising out of the use of this material.