User's Manual

SPECIFICATIONS
Ultraview
Digital
Telemetry
91341,
91343,
91347,
90478,
90479-A
Page 4 of 6
Receiver Options —
The following system configuration options are
available in the 90478.
A — Basic Arrhythmia: High and low heart
rate, asystole and ventricular fibrillation
(2 leads).
B — Multiview
™
I Arrhythmia — Enables
users to review trends of abnormals per
minute; provides additional alarms for
abnormals per minute and abnormals in a
row (2 leads).
C — Multiview II Arrhythmia — Enables users
to review the dominant morphology as well as
episodes or classes of ventricular fibrillation,
ventricular tachycardia (runs), couplets,
single abnormals, tachycardia, pauses,
ventricular and atrio-ventricular pacing;
provides additional alarms for abnormals in a
row, abnormals per minute, and tachycardia
(2 leads).
S — ST segment analysis/review/trend
(2 leads).
Q — Band operation, 608 to 614 MHz
T — Band operation, 1395 to 1400 MHz
V — Band operation, 1427 to 1431.5 MHz
Receiver Electrical Requirements
Power Consumption — ≤ 5.0 watts
External Indicators — LED lights when user
accesses control.
Receiver Physical Dimensions
Height: 4.46 in (11.32 cm)
Width: 2.24 in (5.68 cm)
Depth: 7.00 in (17.78 cm)
Weight: 2.4 lbs (1.11 kg)
Receiver Housing (90479-a)
Accommodates up to 8 modular receivers.
Housing Physical Dimensions
Height: 12.0 in (30.5 cm)
Width: 13.5 in (34.3 cm)
Depth: 17.5 in (44.5 cm)
(includes protective cover)
Weight: 32.0 lbs (14.6 kg)
(without modules loaded)
Receiver Housing Power Requirements
100–120 VAC, 50/60 Hz, 2A; 220–240 VAC,
50/60 Hz, 1A
ENVIRONMENTAL REQUIREMENTS
Operating —
Temperature: 50° to 104° F (10° to 40° C)
Humidity: 95% (non-condensing)
Altitude: 0 to 10,000 ft (0 to 3,030.3
m)
Storage —
Temperature: -40° to 149° F (-40° to 75°
C)
Humidity: 100% (non-condensing)
Altitude: -500 to 40,000 ft (-151.5 to
12,121.2 m)
Water Resistance:
Meets EN60529 IPX1
REGULATORY APPROVALS
All models are ETL listed and meet UL544 or
UL2601-1 standard for electrical safety;
approved by CSA; Models 91341, 91343,
90347, and 90478, approved by FCC and
Industry Canada (RSS - 210, 608-614 MHz
operation only).
ACCESSORIES
Please refer to the Spacelabs Medical Supplies
Catalog for availability of ECG lead wires and
electrodes, blood pressure cuffs, and SpO
2
sensors from Spacelabs Medical.
91341/91343/91347 Transmitter Pouch
Part Number: 015-0500-00
DIN Standard Safety ECG Lead Wire Set
(5 wire) 25.2-inch snap
Part Number: 012-0605-00
Receiver Housing Protective Cover
Part Number: 200-0180-00
Whip Antenna (UHF) 608 to 614MHz
Part Number: 117-0040-00
Belt Clip
Part Number: 344-0020-00
SpO
2
Adapter Cable (Nellcor)
Part Number: 700-0014-00
ABP Telemetry Adapter Cable
Part Number: 700-0015-00
ABP Pouch
Part Number: 015-0501-00
ABP Shoulder Strap
Part Number: 016-0262-00
ABP Waist Belt
Part Number: 016-0080-00