User's Manual

Ultraview Digital Telemetry
2-4 071-0774-00 Rev. A
Display Detail
Signal detection is indicated on your monitor when an ECG signal appears next to
the ECG parameter key in the zone assigned to receive the transmitted telemetry
channel. The transmitter's channel number is always identified above the
waveform, to the left of the ECG key.
Figure 2-1: Display Detail
 ECG trace for first lead
 Telemetry channel number
 ECG key for first lead
 QRS indicator (flashes once per detected beat)
 ECG lead designator
 Display resolution (monitor or extended)
 Paced operation indication (pacemaker detection is enabled)
 Abnormals per minute alarm limit*
 ST segment level for first lead **
쐅 Abnormals in a row alarm limit *
쐈 ECG rate alarm limits; split screen centrals display a bell symbol when alarms
are enabled; bedsides display the rate alarm limits (120/40)
E
C
G
E
C
G
II
MON PACED
ST=0.00
A=3
A/M 10
ROW 4
120
40
VI
ST=0.08
70
CHAN 2241
Split Screen Central
E
C
G
HR=70 A=3 II CHAN 2241
BED 01 DANIELS,R
VI
 
*



쐅

*
**
**
E
C
G
BED 01 DANIELS,R
NIBP=120/68(94) 10:20 SpO2=98% 10:20
NIBP=120/68(94) 10:20 SpO2=98% 10:20
18
Full Screen
HR=70
쐈
쐉
*
씈
씉
씊
씋
씎
씍
씌
씍씏
21
Central/Bedside