User's Manual

Ultraview Care Network
32-6
Batteries
The analyzer contains two lead-acid batteries used to provide short-term
operation during a power failure. The analyzer retains the operating configuration
for up to 5-minutes during an AC power interruption. The batteries should be
replaced every year.
CO
2
Scrubber
The analyzer contains an internal CO
2
scrubber which must be replaced every
year.
Refer to the 90518 Multigas Analyzer Service Manual (P/N 070-0643-xx) for
details on replacing the CO
2
scrubber, cleaning and sterilization procedures.
Ultrasound Transducers
Basic cleaning should be performed regularly to ensure continued reliability.
1. Keep accessories clean.
2. Wipe transducers with a soft cloth moistened with a germicidal solution after
each use.
3. Wipe off any ultrasound gel on the ultrasound transducers or the monitor as
soon as possible.
!
All batteries should be disposed of properly to
protect the environment. Lithium batteries
should be fully discharged before disposal.
Batteries such as lead-acid (Pb) and nickel-
cadmium (Ni-Cd) must be recycled. Please
follow your internal procedures and/or local
(provincial) laws regarding disposal or recycling.