User's Manual

Contents
28-1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Setting Up the Secondary Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Copying Stored Values of the Primary Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Restoring a Stored Value. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Copying Primary Attributes to the Secondary . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Resetting Default Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Tracking or Locking Displays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Adjusting Scaled Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Remote Display
Overview
The Ultraview 1700 provides an optional output to a remote-configurable
secondary display. This secondary display enables you to view selected
parameters from the primary display.
The primary monitor is used to control the configuration and waveform display
characteristics of the secondary remote display. The secondary display has no
touchscreen surface or functional keys.
Setting Up the Secondary Display
The Configuration menu for the secondary display appears on the primary
monitor. The menu functions identically to the primary monitor’s menu although it
has three additional keys.
Selecting Colors and Priorities
Each parameter has a specific default color and priority. You can change the
colors or priority levels of the parameters to customize the monitor to your specific
needs.
After making any configuration change, touch STORE to make the secondary
display changes permanent. If you do not touch STORE, the system disregards
your changes.
The PARAMETER CONFIG key allows you to change the system default priorities
and colors. The current parameter priority and color default is visible from the
DISPLAY PRIORITIES toggle key. The LOCAL key displays the current active
!
• Your display may not be configured to allow changes to
parameter priorities or colors. Contact your hospital system
administrator for details.
To set up the remote display:
1 Touch MONITOR SETUP.
2 Touch SECONDARY CONFIG.
3 Touch PARAMETER CONFIG.
4 Select a parameter.
5 Select the destination priority.
6 Select a color.
7 Select the parameter key to be
colored (the key and waveform
will appear in the chosen color).
8 Touch STORE to store local
color and priority settings.