User's Manual

Calculations
25-9
Refer to Table 1 for adult and neonatal BSA, height and weight values for
hemodynamics, oxygenation, and renal calculations.
Editing Day and Time
To create a Calculations record for a specified day and time, create a new entry
and highlight the DAY/TIME key. Then touch EDIT DAY/TIME and enter the day
and time for the record you want to create.
Touch the DAY, HOUR, or MINUTE keys to highlight that key and display the on-
screen keypad. The selected parameter and value appear in the on-screen
keypad.
The hour can appear in either 12-hour or 24-hour format. If the system is set for
12-hour format, use the AM/PM key to select a.m. and p.m. on the DAY/TIME key.
When editing minutes and hours, you cannot change the value to a future time.
When you have entered the day, hour, and minute via the on-screen keypad, the
input values and output calculations reflect data available from the system at the
entered time. An e appears under any edited DAY/TIME key.
Storing an Entry
Touching the STORE ENTRY key after touching the DAY/TIME key stores the
record of input values and output calculations in the selected monitor’s database.
Up to 100 stored records may be saved in each system.
The letter s is displayed under the DAY/TIME key to indicate that the record has
been stored. If you edit a record after it has been stored, the letter s is removed
because the newly edited changes have not been stored. Storing a record
overwrites the data already stored.
Table 1: BSA, Height, and Weight Calculations
Label Name Units
Default Value
(1030, 1050, 1500, 1600 only)
Valid Range
Adult Neonatal
BSA Body Surface Area m
2
1.81 0.11 0.03 - 3.69
HT Height
cm
in
170
66.9
35
13.8
20 - 215
7.9 - 84.6
WT Weight
kg
lb
70.000
154.324
1.500
3.307
0.2 - 250.0
0.441- 551.156
!
• Stored records are saved until the system is powered down or
until patient data is purged via the Admit/Discharge function.
To create a record for a past
time:
1 Access Local or Remote Calcs.
2 Touch NEW ENTRY.
3 Highlight the DAY/TIME key on
a new or prior entry.
4 Touch EDIT DAY/TIME.
5 Select DAY, HOURS, or
MINUTES.
6 Use the on-screen keypad to
change.
7 Touch ENTER on the on-
screen keypad.
8 Touch PREVIOUS MENU,
then STORE ENTRY to retain
entry in Calcs table.
To store an entry:
1 Access Local or Remote Calcs.
2 Highlight DAY/TIME key of the
entry to be stored.
3 Touch STORE ENTRY.