User's Manual

Ultraview Care Network
13-10
Recording Measurements
You can choose to print out either the complete NIBP display or only the numeric
values of the last reading.
Reviewing Measurements
You can review a patient’s NIBP measurements by scrolling through the
measurement table line-by-line or page-by-page. (A page is limited to five
measurements if the pulse rate is displayed. Otherwise, a page is ten
measurements.)
To scroll line-by-line, touch the single arrow keys:
• To review earlier measurements, touch the ← key.
• To review later measurements, touch the → key.
To scroll page-by-page, touch the double arrow keys:
• To review earlier measurements, touch the
«

key.
• To review later measurements, touch the

» key.
To page to the earliest five (or ten) measurements, touch the
|
«

key.
To page to the latest five (or ten) measurements, touch the

»
|
key.
Recording Waveforms
You can print NIBP waveforms and values. Refer to Printing on page 4-7 for
additional information.
Restoring User-Defined Settings
With the Restore Settings feature, you can restore the user-configurable settings
to the defaults previously stored as user settings. User-configurable settings are
listed in Setting User-Defined Default Values on page 7-7.
!
• RESTORE SETTINGS changes the user-configurable settings
for all parameters in the module.
To print the NIBP measurements
currently displayed:
1 Touch NIBP.
2 Touch REVIEW.
3 Touch PRINT.
To print the most recent
measurement (no table):
1 Touch RECORD (monitor key).
2 Touch NIBP.
To review NIBP measurements:
1 Touch NIBP.
2 Touch REVIEW.
To print NIBP waveforms:
1 Touch RECORD.
2 Touch flashing NIBP parameter.
key.
To restore user-defined settings:
1 Touch ECG.
2 Touch SETUP.
3 Touch RESTORE SETTINGS.
4 Select YES.