User's Manual

Ultraview Care Network
13-6
Display Detail
Figure 13-1 and Figure 13-2 illustrate typical NIBP displays. You can view NIBP
readings from any Ultraview Care Network bedside or central monitor on a
network. The NIBP display on a split-screen central monitor appears in a format
slightly different from that of a bedside or full-screen central monitor.
Figure 13-1: Bedside monitor display
Figure 13-2: Central monitor, split-screen display
 STAT key initiates an immediate blood pressure measurement. While a
measurement is in progress the key label changes to STOP.
 NIBP key.
 Last systolic and diastolic readings.
 NIBP alarm limits. Split-screen central monitors display a bell symbol when
alarms are enabled. Bedside monitors display the high and low alarm limits
for systole and diastole. The asterisk indicates alarms are enabled for mean
pressure.
 Mean reading.
 Current interval for automatic readings (q 15 min). q’ in place of q indicates
that the reduced delay of 5-seconds between readings is active (refer to
Setting Automatic Measurements on page 13-9).
 NIBP measurement table.
 Time and date of the last reading.
08:30 am 128/67 (80)
08:45 am 132/67 (83)
09:00 am 134/69 (85)
09:15 am 140/72 (89)
09:30 am 141/72 (91)
09:45 am 138/73 (88)
10:00 am 140/73 (90)
10:15 am 142/76 (92)
10:30 am 144/77 (95)
10:45 am 165/97 (120)
INTERVAL
q 15 min
10:45
06/03
LAST BP =
N
I
B
P
165
97
m
m
H
g
(120)
S
D
150
100
100
60
*

   
S
T
A
T

N
I
B
P
165/97
10:45
06/03
LAST BP =
mmHg
(120)
BED 01 DAVIS, J.
 