User's Manual

5-27
Bedside/Transport Monitor Troubleshooting Guide
Clinical Situation Possible Cause Solution
Cannot change parameter
priority or colors
■ Monitor may not be set up to allow
the user to change priority or colors.
■ Contact your system administrator.
Changed parameter priority
or colors are lost
■ The STORE key was not touched
after the selection was made.
■ Touch the STORE key to make
changes permanent.
Transport monitor has no DC
power
■ The monitor was not plugged into an
AC outlet while not in use.
■ Plug the monitor into an AC outlet
to recharge batteries to 80% power
(refer to Battery Gauge on page 5-
14).