User's Manual

Bedside/Transport Monitors
5-7
Setting Up Priorities and Colors
Table 1 lists default priorities and colors for each screen parameter.
Table 1: Parameter Priorities and Colors
Channel
Type
Name Priority Color
ECG1 Electrocardiogram (first lead) 1 Green
ECG2 Electrocardiogram (second lead) 2 Green
RESP Respiration 3 Cyan
VARI Varitrend 4 White
ART Arterial Pressure 5 Red
UA Umbilical Artery Pressure 6 Red
PA Pulmonary Arterial Pressure 7 Yellow
UV Umbilical Vein Pressure 8 Blue
CVP Central Venous Pressure 9 Blue
RAP Right Atrial Pressure 10 Blue
ICP Intracranial Pressure 11 Magenta
LAP Left Atrial Pressure 12 Red
PRS Other Pressure (general) 13 Magenta
UNLP Unlabeled Pressure 14 Blue
EtCO
2
End Tidal CO
2
(Capnography) 15 White
SpO
2
(SaO
2
) Pulse Oximetry (O
2
Saturation) 16 Green
NIBP Noninvasive Blood Pressure 17 Red
SvO
2
Venous O
2
Saturation 18 Magenta
TCP Partial Pressure of Transcutaneous O
2
19 White
EEG Electroencephalogram 20 Blue
GAS Gas Analyzer Flexport
®
Interface 21 White
CO Cardiac Output 22 Magenta
TEMP Temperature 23 White
INCUB
WARMR
Incubator/Warmer 24 White
PO + ET SpO
2
and EtCO
2
Flexport Interface 25 White
IV Infusion Flexport Interface 26 White
VENT Ventilator Flexport Interface 27 White
OTHER 28 White
To change a parameter priority
or color:
1 Touch MONITOR SETUP.
2 Touch MONITOR CONFIG.
3 Touch PARAMETER CONFIG.
4 Select a parameter.
5 Select the destination priority.
6 Select a color.
7 Select the parameter key to be
colored (the key and waveform
will appear in the chosen
color).
8 Touch STORE to store local
color and priority settings.