User's Manual

Printing
4-19
Record Vitals Report
(Ultraview 1030/1050 Only)
The Record Vitals Report:
• provides manual recordings of parameter data on 50mm roll paper
• only prints to the monitor’s internal recorder
Figure 4-7: Vitals Setup menu keys
Data Interval
You may choose a time interval ranging from 1-minute to 60-minutes, specifically,
1-, 2-, 3-, 5-, 10-, 15-, 30-, and 60-minute intervals. You can also select NIBP
ON/OFF and other parameter data from that reading time. If you select NIBP ON,
you are not required to select an interval. NIBP readings appear in the report
based on the time that you take the readings. If you do not choose an interval or
NIBP ON before printing, the message VITALS REPORT ERROR prints.
Start Time
You may print vital sign measurements ranging from those taken in the past hour
to those taken in the last 24-hours, specifically, 1-, 2-, 4-, 8-, 12-, and 24-hours.
Select Parameters
You may choose the parameters you wish to have included in the report. If you
choose a vital sign for which no data is available, ??? appears on the report.
The following is an example of a vitals report. A blank space to enter notes is
standard in every report.
Figure 4-8: Vitals report
Time HR BPM Resp RPM Temp 1 C Notes
07:50 74 18 37.8
07:52 74 18 37.8
07:54 54 13 37.8
07:56 54 13 37.8
To define the details of a report:
1 Touch MONITOR SETUP.
2 Touch RECORDER CONFIG.
3 Touch VITALS SETUP.
4 Touch DATA INTERVAL and
select an interval for report
history.
5 Touch PREVIOUS MENU.
6 Touch START TIME and select
a time period for report history.
7 Touch PREVIOUS MENU.
8 Touch SELECT
PARAMETERS and select the
parameters you wish to include
in the report.
9 Touch PREVIOUS MENU.
START
TIME
PRINT
VITAL SIGNS
Configure parameters or start vitals recording
SELECT
VITALS
SETUP
DATA
INTERVAL PARAMETERS